Updated November 2026
The Work Sharp Knife & Tool Sharpener MK.2 is a guided sharpener that lets you restore a dull edge and keep it sharp without guessing at angles. In this guide you will learn how to set up the sharpener, run a knife through the correct stages, and check your results. The steps below apply to most kitchen knives and general-purpose tools.
What You Need Before You Start
Gather the sharpener, the knife or tool, a towel, and a cutting board or flat surface. Check the manufacturer’s instructions for the included guides and abrasive belts, since they can vary by kit. Clean the knife so grit from the last sharpening does not transfer to the new edge.
Shopping for one? See our guide: How to Use Chef's Choice Knife Sharpener 2 Stage: Steps That Work (2026).
How to Sharpen a Kitchen Knife Step by Step
- Set the sharpener on a stable surface and confirm the guide that matches your knife’s blade style is seated correctly.
- Clamp the blade in the guide so the edge sits at the angle the sharpener specifies for your knife type.
- Begin with the coarser abrasive stage only if the edge is chipped or badly dulled. Otherwise start at the medium stage.
- Draw the blade through the abrasive slowly, from heel to tip, using the same number of passes on each side.
- Move to the finer stage and repeat with lighter pressure to refine the bevel and remove the burr.
- Finish with the polishing stage if your kit includes one, then wipe the blade clean.
Checking the Edge and Maintaining It
Test sharpness by slicing a sheet of printer paper or a ripe tomato. A clean cut with little tearing means the edge is working. Owners often report that light touch-ups after every few weeks of regular use keep a knife sharp far longer than occasional heavy sharpening sessions.
Choosing Between Full and Maintenance Sharpening
Use a full sharpening session only when the edge is noticeably dull or damaged. For routine upkeep, a few passes on the finest stage restore enough sharpness to keep the blade working well. Over-sharpening removes steel quickly, so stop as soon as the edge feels right.
Common Mistakes
- Changing the angle partway through a pass, which creates a rounded or uneven bevel.
- Applying heavy pressure, which can wear the abrasive faster and overheat the edge.
- Skipping the finer stage, leaving a rough edge that dulls quickly.
- Sharpening a serrated or ceramic blade without a suitable guide.
- Failing to remove the burr, which can leave the edge feeling sharp but cutting poorly.
Recommended Gear
- Work Sharp Knife & Tool Sharpener MK.2 is the main sharpener this guide covers, built for guided sharpening of kitchen knives and tools. View on Amazon
- Replacement abrasive belts keep the sharpener cutting well once the original belts wear down. View on Amazon
- A cut-resistant glove can protect your hand while you handle freshly sharpened blades. View on Amazon
For more on specific setups, see Work Sharp Precision Adjust Knife Sharpener: Step-by-Step Guide and Work Sharp Knife Sharpener Accessories: A Practical Guide (2026).
FAQ
How often should I sharpen my kitchen knives?
Most home cooks benefit from a quick touch-up every few weeks and a full sharpening only when the edge stops performing. Frequency depends on how often you cut and what you cut through.
Can I use this sharpener on tools other than knives?
The sharpener is designed for knives and general tools with suitable bevels. Check the manufacturer’s guidance for the specific tool before you sharpen it.
Do I need to use water or oil while sharpening?
Follow the manufacturer’s instructions for your model and abrasive. Some kits are designed to run dry, while others call for a lubricant.
Conclusion
With the right setup and a steady, even stroke, the Work Sharp Knife & Tool Sharpener MK.2 can bring a dull blade back to a clean, useful edge. Keep your passes consistent, finish with the finer stage, and touch up often rather than waiting for heavy sharpening. A little regular care keeps your knives performing well for years.

