Updated November 2026
Learning how to use Chef’s Choice knife sharpener 2 stage models comes down to two things: running the blade through the correct slot in the right order, and keeping steady, light pressure throughout. This guide compares the two main ways people approach the tool, a fast one-pass routine versus a slower, more careful method, so you can decide which fits your kitchen. For the full walkthrough, see Chef's Choice Knife Sharpener Instructions: A Step-by-Step Guide.
| Criteria | Quick Pass Method | Careful Two-Pass Method |
|---|---|---|
| Time per knife | About 1 to 2 minutes | About 3 to 5 minutes |
| Edge refinement | Good for routine upkeep | Better for dull or damaged edges |
| Stage use | Stage 1 then Stage 2, a few passes each | Full stage sequence, repeated checks |
| Metal removal | Moderate | Controlled and minimal |
| Best for | Weekly touch-ups | Restoring a neglected blade |
Setup and Slot Selection
Both methods start with the right slot. Stage 1 uses diamond abrasives to establish the bevel, and Stage 2 uses ceramic-coated wheels to refine it. Check your model’s manual to confirm which slots apply to your knife type, since many 2-stage units also include a separate slot for 15-degree and 20-degree edges. Winner: the careful method, because checking the slot before starting prevents a mismatched angle that can take longer to fix than the sharpening itself.
Pass Count and Pressure
The quick method typically runs the blade through Stage 1 about 3 to 4 times, then Stage 2 about 3 to 4 times, using light, even pressure and pulling the knife toward you. The careful method repeats each stage more deliberately and checks for a burr along the spine after each set. Winner: the quick method for routine maintenance, since it avoids over-sharpening a blade that only needs a light touch.
Burr Check and Finishing
A small burr on the opposite side of the edge signals that you have reached the apex. The careful method pays closer attention to this step, running a fingertip gently from spine to edge to feel for it. Winner: the careful method, because a consistent burr check produces a more uniform edge, especially on older blades.
Cleaning and Maintenance
Wipe metal filings from the slots and wheels after each session, and avoid forcing a dull blade through the sharpener too quickly. The quick method leaves less time for cleanup, which can allow debris to build up over months. Winner: the careful method for long-term tool health, since the slower pace makes it easier to notice wear or buildup early.
Pros & Cons
Quick Pass Method
- Fast and simple to repeat weekly.
- Requires little attention to detail once learned.
- Con: may not fully restore a badly worn edge.
Careful Two-Pass Method
- Produces a more even, reliable edge.
- Better for restoring neglected or chipped blades.
- Con: takes noticeably longer per knife.
Which Should You Choose?
- Choose the quick pass method if you sharpen a few kitchen knives every week and want a fast touch-up. Pair it with a sharpener such as the View on Amazon.
- Choose the careful two-pass method if your knives have been neglected or you are restoring a favorite chef’s knife. The same model works for both, so you only need to change your routine. You can also compare other options in Best Chef's Knife Sharpener: 4 Types Compared and How to Choose (2026).
How to Use Chef’s Choice Knife Sharpener 2 Stage: FAQ
How many passes should I make through each stage?
Most owners start with about 3 to 4 passes through Stage 1 and 3 to 4 through Stage 2, then check for a burr. Add passes only if the edge still feels dull. Over-sharpening wears away more metal than needed.
Can I use this sharpener on serrated knives?
Standard 2-stage models are designed for straight edges. For serrated blades, a dedicated tool is a better choice. See Sharpener for Serrated Knife: How to Sharpen Serrations at Home for details.
Is it safe to sharpen a ceramic knife with this tool?
Ceramic blades are harder than the abrasives in most 2-stage units and generally need a diamond or specialized ceramic sharpener. Check the manufacturer’s guidance before trying. You can read more in Sharpener for Ceramic Knife: What Works and How to Use It (2026).
Conclusion
Use the quick pass method for weekly upkeep and the careful two-pass method for restoring dull or damaged blades. In both cases, match the slot to your knife, keep pressure light, and check for a burr before finishing. Consistent habits matter more than the number of passes.

