Updated November 2026
A knife & scissors sharpener can restore a dull kitchen knife and a tired pair of shears in a few minutes, as long as you match the tool to the blade and follow a consistent angle. This guide explains how these combination sharpeners work, how to use them safely, and how to avoid the mistakes that round off edges instead of sharpening them.
How a Knife & Scissors Sharpener Works
Most combination sharpeners use two or more sets of abrasive slots or wheels. A coarse stage removes metal and forms a new edge, while a fine stage polishes that edge and makes it keen. Some models add a ceramic or diamond stage for scissors, since scissor blades are often harder and need more pressure to grind effectively.
Shopping for one? See our guide: Smith's Knife and Scissor Sharpener (2026): Which Should You Choose?.
The key idea is that the sharpener sets the angle for you. Consistent angle is what separates a sharp edge from a dull one that only looks shiny.
Sharpening Kitchen Knives Step by Step
- Check the blade for chips or a rolled edge. A sharpener can fix dullness, but badly damaged steel needs more work than a slot can give.
- Set the sharpener to the coarse stage for a very dull knife, or skip straight to fine for a knife that is only slightly dull.
- Hold the handle firmly and draw the blade through the slot from heel to tip, using light, even pressure.
- Repeat 5 to 8 passes per side on the coarse stage, then 3 to 5 passes on the fine stage.
- Test by slicing a sheet of paper. A clean cut without tearing means the edge is working.
Sharpening Scissors Correctly
Scissors need a different approach because they cut by shearing rather than slicing. Open the blades fully and feed them into the slot one blade at a time, keeping the pivot point closest to the slot. Sharpen the outer edge of each blade, not the inside face, which should stay flat to meet its partner.
Make 5 to 10 light passes per blade. Then close the scissors and cut through a thick piece of paper or cardboard. Clean, smooth cuts mean the blades are aligned and sharp.
Matching the Tool to the Blade
Not every sharpener is suited to both tools. Check the manufacturer’s instructions for each slot, since some are designed only for straight-edged knives and others for shears or serrated blades.
Recommended gear
- Cut-resistant gloves: useful when handling sharp blades during cleaning or while holding small scissors steady. View on Amazon
- Cutting board with a stable base: keeps the sharpener from sliding when you pull the blade through. View on Amazon
- Honing rod: helps maintain the edge between full sharpening sessions. View on Amazon
Common Mistakes to Avoid
- Pressing too hard, which can bend thin blades or wear out coarse slots quickly.
- Using the coarse stage on a knife that only needs a light touch-up.
- Sharpening scissors through the wrong side, which can misalign the blades.
- Skipping the fine stage, leaving a rough burr that dulls fast.
- Storing the sharpener near moisture, which can clog the abrasives over time.
FAQ
How often should I use a knife & scissors sharpener?
Most home cooks sharpen kitchen knives every few months and scissors when they start to tear paper. Frequent use or hard cutting, such as on bones or frozen foods, will call for more regular sharpening.
Can a knife & scissors sharpener fix a chipped blade?
A sharpener can smooth minor chips, but deep damage usually needs a professional or a more aggressive coarse stage. Check the blade carefully before deciding.
Is a combination sharpener better than a whetstone?
A combination sharpener is faster and more consistent for beginners, while a whetstone offers more control for experienced users. Both can produce a sharp edge when used correctly.
Conclusion
A well-chosen knife & scissors sharpener makes it easy to keep both tools working cleanly. Use the coarse stage only when needed, always finish on the fine stage, and test your edges with paper. Consistent, gentle passes will give you better results than a single hard session.

