Updated November 2026

Learning how to use Chef’s Choice knife sharpener 2 stage models comes down to two things: running the blade through the correct slot in the right order, and keeping steady, light pressure throughout. This guide compares the two main ways people approach the tool, a fast one-pass routine versus a slower, more careful method, so you can decide which fits your kitchen. For the full walkthrough, see Chef's Choice Knife Sharpener Instructions: A Step-by-Step Guide.

Criteria Quick Pass Method Careful Two-Pass Method
Time per knife About 1 to 2 minutes About 3 to 5 minutes
Edge refinement Good for routine upkeep Better for dull or damaged edges
Stage use Stage 1 then Stage 2, a few passes each Full stage sequence, repeated checks
Metal removal Moderate Controlled and minimal
Best for Weekly touch-ups Restoring a neglected blade

Setup and Slot Selection

Both methods start with the right slot. Stage 1 uses diamond abrasives to establish the bevel, and Stage 2 uses ceramic-coated wheels to refine it. Check your model’s manual to confirm which slots apply to your knife type, since many 2-stage units also include a separate slot for 15-degree and 20-degree edges. Winner: the careful method, because checking the slot before starting prevents a mismatched angle that can take longer to fix than the sharpening itself.

Pass Count and Pressure

The quick method typically runs the blade through Stage 1 about 3 to 4 times, then Stage 2 about 3 to 4 times, using light, even pressure and pulling the knife toward you. The careful method repeats each stage more deliberately and checks for a burr along the spine after each set. Winner: the quick method for routine maintenance, since it avoids over-sharpening a blade that only needs a light touch.

Burr Check and Finishing

A small burr on the opposite side of the edge signals that you have reached the apex. The careful method pays closer attention to this step, running a fingertip gently from spine to edge to feel for it. Winner: the careful method, because a consistent burr check produces a more uniform edge, especially on older blades.

Cleaning and Maintenance

Wipe metal filings from the slots and wheels after each session, and avoid forcing a dull blade through the sharpener too quickly. The quick method leaves less time for cleanup, which can allow debris to build up over months. Winner: the careful method for long-term tool health, since the slower pace makes it easier to notice wear or buildup early.

Pros & Cons

Quick Pass Method

  • Fast and simple to repeat weekly.
  • Requires little attention to detail once learned.
  • Con: may not fully restore a badly worn edge.

Careful Two-Pass Method

  • Produces a more even, reliable edge.
  • Better for restoring neglected or chipped blades.
  • Con: takes noticeably longer per knife.

Which Should You Choose?

  • Choose the quick pass method if you sharpen a few kitchen knives every week and want a fast touch-up. Pair it with a sharpener such as the View on Amazon.
  • Choose the careful two-pass method if your knives have been neglected or you are restoring a favorite chef’s knife. The same model works for both, so you only need to change your routine. You can also compare other options in Best Chef's Knife Sharpener: 4 Types Compared and How to Choose (2026).

How to Use Chef’s Choice Knife Sharpener 2 Stage: FAQ

How many passes should I make through each stage?

Most owners start with about 3 to 4 passes through Stage 1 and 3 to 4 through Stage 2, then check for a burr. Add passes only if the edge still feels dull. Over-sharpening wears away more metal than needed.

Can I use this sharpener on serrated knives?

Standard 2-stage models are designed for straight edges. For serrated blades, a dedicated tool is a better choice. See Sharpener for Serrated Knife: How to Sharpen Serrations at Home for details.

Is it safe to sharpen a ceramic knife with this tool?

Ceramic blades are harder than the abrasives in most 2-stage units and generally need a diamond or specialized ceramic sharpener. Check the manufacturer’s guidance before trying. You can read more in Sharpener for Ceramic Knife: What Works and How to Use It (2026).

Conclusion

Use the quick pass method for weekly upkeep and the careful two-pass method for restoring dull or damaged blades. In both cases, match the slot to your knife, keep pressure light, and check for a burr before finishing. Consistent habits matter more than the number of passes.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our cookware & knives guides, checking product details against manufacturer specifications and owner feedback.