Updated November 2026

To make bread in Dutch oven, you preheat a heavy lidded pot until it is screaming hot, drop in a wet dough, and bake it covered for the first part of the bake. The trapped steam keeps the crust soft long enough for the loaf to rise fully, then the uncovered finish turns the outside deep brown and crackly. This guide walks through the setup, the bake and the fixes for the most common problems.

What You Need Before You Start

Almost any enameled or bare cast iron Dutch oven will work, as long as it has a tight-fitting lid and is rated for oven temperatures well above 450°F. Most manufacturers specify a maximum temperature for their enamel, so check the care label before you preheat. A 5- to 7-quart pot suits a standard loaf.

Shopping for one? See our guide: 6 Best Cast Iron Dutch Ovens (2026): Expert Picks and Buying Guide.

  • A Dutch oven with a lid (5–7 quarts)
  • Parchment paper or a silicone sling
  • A kitchen scale and a bench scraper
  • A sturdy oven mitt or pot holder
  • A lame or sharp knife for scoring

How to Make Bread in Dutch Oven, Step by Step

Start with a dough that has high hydration, roughly 70 to 80 percent water to flour by weight. A basic no-knead dough of flour, water, salt and a small pinch of yeast is a reliable place to begin. Let it ferment at room temperature until it doubles, usually 12 to 18 hours for no-knead dough.

  1. Shape the dough into a tight round on a floured surface, then place it seam-side up on a sheet of parchment.
  2. Let it rest for 30 to 60 minutes while the oven preheats.
  3. Place the empty Dutch oven with its lid in the oven and heat to 475°F to 500°F for at least 30 minutes.
  4. Carefully remove the pot, lift the dough by the parchment, and lower it into the pot. Score the top with a deep cut about a quarter inch deep.
  5. Cover and bake for 20 minutes. This traps steam from the dough.
  6. Remove the lid and bake another 20 to 30 minutes, until the crust is deep brown and the internal temperature reads about 205°F to 210°F on an instant-read thermometer.
  7. Lift the loaf out with the parchment and cool on a rack for at least one hour before slicing.

Why the Covered Bake Matters

The lid holds moisture around the dough during the first 20 minutes. That steam keeps the surface flexible, so the loaf expands before the crust sets. Without it, you usually get a dense, flat bread with a tight, pale top.

Handling a Hot Pot Safely

A preheated Dutch oven is extremely hot, and the handles get hot too. Use thick mitts, keep the pot on a heat-safe surface, and never run cold water into it while it is still hot, since thermal shock can crack enamel or cast iron.

Common Mistakes

  • Skipping preheating. A cold pot gives a flat loaf with weak oven spring.
  • Using too much flour on the surface, which can leave a dry, floury crust.
  • Not scoring deeply enough, so the loaf bursts unevenly at the side.
  • Slicing too early. The crumb is still setting, and a warm loaf can look gummy inside.
  • Leaving the lid on for the whole bake, which keeps the crust soft and pale.

A lidded cast iron pot holds heat evenly and gives you a consistent crust from loaf to loaf. View on Amazon

A bench scraper makes dividing and transferring sticky dough much cleaner. View on Amazon

A digital instant-read thermometer takes the guesswork out of knowing when the loaf is done. View on Amazon

FAQ

Do I need a special Dutch oven for bread?

No. Any heavy, lidded pot that tolerates high oven temperatures will work. Enameled and bare cast iron are the most common choices.

Can I use parchment paper in the Dutch oven?

Yes. Parchment is safe at typical bread-baking temperatures and makes the loaf easy to lift in and out. Trim any overhang so it does not touch the heating element.

How do I know when the bread is fully baked?

Check that the crust is deep brown and that an instant-read thermometer in the center reads about 205°F to 210°F. The loaf should also sound hollow when tapped on the bottom.

Conclusion

Baking bread in a Dutch oven comes down to a hot pot, a wet dough and a covered start. Follow the preheat and steam steps, score deeply and let the loaf cool before cutting. Once you have the process down, you can adjust hydration and fermentation to suit your own taste.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our cookware & knives guides, checking product details against manufacturer specifications and owner feedback.