Updated November 2026

A good cast iron skillet cleaner removes food residue and grease without stripping the seasoning that makes the pan nonstick. Most home cooks reach for dish soap, a scrubber, or a chainmail pad, and each has a place. The right cleaner depends on how often you cook, how heavily you season, and how stubborn your leftovers tend to be. The picks below were chosen by reviewing product specifications, brand reputation, and patterns in owner feedback, with attention to abrasiveness, residue removal, and how well each product fits routine care. For the full cleaning routine, see How to Clean a Cast Iron Skillet: 5 Steps That Protect the Seasoning.

Our Top Picks

Quick Comparison

Product Best for Key feature
Lodge Cast Iron Scrubber Brush Daily cleaning with hot water Stiff nylon bristles that lift residue without metal contact
Lodge Chainmail Scrubber Baked-on food and heavy buildup Stainless chainmail that removes debris quickly
Dawn Ultra Dish Soap Cutting through cooking grease Degreasing formula widely used by cast iron owners
Bar Keepers Friend Soft Cleanser Restoring a dull or discolored pan Mild oxalic acid cleaner for stubborn stains
Crisco Vegetable Shortening Post-cleaning seasoning touch-ups Thin, fully rubbed-in layer that builds polymerized oil

Lodge Cast Iron Scrubber Brush

This suits cooks who clean after nearly every use and want a tool that is safe on seasoning. The stiff nylon bristles loosen food without scratching the surface, so it works well as a daily-care companion.

Key specs

  • Stiff nylon bristles on a hand-held brush
  • Designed for use with hot water and minimal soap
  • Made by Lodge, a long-established cast iron manufacturer

Pros

  • Gentle enough for routine cleaning
  • Lifts sticky residue from the cooking surface and corners
  • Easy to rinse and dry

Cons

  • Less effective on heavy, baked-on buildup
  • Bristles can wear down over time with frequent use

View on Amazon

Lodge Chainmail Scrubber

This is for cooks who regularly sear meat or leave cornstarch and browned bits stuck to the pan. It handles stubborn debris faster than a brush, though it requires a lighter touch to protect seasoning.

Key specs

  • Stainless steel chainmail construction
  • Used dry or with hot water
  • Made by Lodge for cast iron care

Pros

  • Removes baked-on food quickly
  • Good for resetting a pan with rough spots
  • Durable and easy to store

Cons

  • Can remove seasoning if scrubbed too hard
  • Not ideal for delicate or freshly seasoned pans

View on Amazon

Dawn Ultra Dish Soap

This suits home cooks who want a simple, widely available option for greasy cleanup. Many cast iron owners use a small amount of dish soap after cooking fatty foods, then rinse and dry thoroughly.

Key specs

  • Liquid degreasing dish soap
  • Used in small amounts with warm water
  • Made by Dawn, a common household brand

Pros

  • Cuts grease effectively
  • Inexpensive to keep on hand
  • Easy to find at most stores

Cons

  • Strong surfactants can thin seasoning if used with heavy scrubbing or long soaks
  • Requires prompt drying to prevent rust

View on Amazon

Bar Keepers Friend Soft Cleanser

This is best for restoring a pan that has gone dull, discolored, or rusty in spots. Owners often use it as an occasional reset rather than a daily cleaner, since it is more aggressive than soap.

Key specs

  • Mild oxalic acid-based powder cleanser
  • Applied with a damp cloth or sponge
  • Made by Bar Keepers Friend

Pros

  • Removes rust and stubborn stains
  • Restores a dull surface before re-seasoning
  • Works quickly with light pressure

Cons

  • Too harsh for routine cleaning
  • Requires thorough rinsing and immediate re-oiling

View on Amazon

Crisco Vegetable Shortening

This is for cooks who want to maintain the protective layer after cleaning. It is not a cleaner, but it is the standard follow-up step for many cast iron owners who wipe on a thin coat of fat.

Key specs

  • Solid vegetable shortening
  • Applied as a thin layer after drying
  • Made by Crisco

Pros

  • Easy to apply in a thin, even layer
  • Helps protect against moisture and rust
  • Low-cost and widely available

Cons

  • Applied too thickly, it can turn sticky
  • Does not clean, so it must be used after another cleaning method

View on Amazon

Buying Guide

Selection criteria

Choose a cleaner based on how it handles three things: residue removal, impact on seasoning, and ease of routine use. A product that cleans well but strips oil every time will cause more work later. Look for tools and cleaners that match your normal cooking habits.

Important features to look for

  • Non-metal scrubbing surfaces: Nylon or soft bristles suit daily cleaning.
  • Mild degreasers: Gentle dish soaps handle oil without heavy abrasion.
  • Targeted stain removers: Mild acid cleansers are useful for rust and discoloration, not routine work.
  • Protective finishing agents: Oils or shortening help rebuild a thin layer after washing.

Specs to check

  • Bristle stiffness and material on brushes
  • Chainmail gauge and whether it is stainless steel
  • Ingredients in soaps and cleansers, especially acid content
  • Whether the product is intended for seasoned cast iron

Choosing by need

  • Daily cook with light residue: A nylon brush and hot water are enough.
  • Greasy, frequent cooking: Add a small amount of dish soap after cooking fatty foods.
  • Heavy buildup or sticky pans: A chainmail scrubber can help, used lightly.
  • Rust or dull patches: A mild acid cleanser, followed by full re-seasoning.

Things to watch out for

  • Do not soak cast iron for long periods, since prolonged water exposure encourages rust.
  • Always dry the pan completely, ideally on a low burner for a minute or two.
  • Avoid harsh abrasives on freshly seasoned surfaces, as they can remove the layer you built.
  • For rust removal or seasoning repair, see How to Fix and Restore Damaged Cast Iron Seasoning.

FAQ

Can I use dish soap on cast iron?

Yes. Many manufacturers say a small amount of mild dish soap is acceptable for cast iron, as long as you rinse quickly, dry completely, and re-oil lightly. Modern soaps are generally gentler than older formulas, but frequent long soaks should still be avoided.

How often should I clean my cast iron skillet?

Clean it after each use, while it is still warm. Rinse with hot water, scrub off residue, dry thoroughly, and apply a thin coat of oil if the surface looks dry. Deep cleaning or re-seasoning is only needed when the surface becomes sticky, dull, or rusted.

Is a chainmail scrubber safe for seasoning?

It can be, if used with light pressure. Chainmail removes debris effectively, but it can also strip seasoning when scrubbed hard. Many owners reserve it for stubborn residue and avoid it on newly seasoned pans.

What is the best way to remove rust from cast iron?

Scrub the rust with a mild abrasive or acid cleanser, rinse, dry immediately, and then re-season the pan. Leaving it wet even briefly can cause more rust. A detailed process is covered in How to Fix and Restore Damaged Cast Iron Seasoning.

Should I use soap or boiling water to clean cast iron?

Both approaches are used. Hot water with a brush handles most daily residue. Soap helps with grease. Boiling water can loosen stuck food, but it does not replace drying and oiling.

Do I need to re-season after every cleaning?

No. A light oil coat after drying is usually enough for daily care. Full seasoning is needed only when the surface is damaged or the pan has been stripped. For the steps, see How to Season Cast Iron Skillet: 6 Steps for a Slick, Durable Pan.

Can I clean cast iron in the dishwasher?

No. Dishwashers use long cycles, strong detergents, and extended moisture exposure, all of which can strip seasoning and cause rust. Hand cleaning is the standard recommendation.

What should I use to protect the pan after cleaning?

A thin layer of neutral cooking oil or shortening works well. Wipe it on, then buff off any excess so the surface does not feel greasy. This helps the pan stay protected between uses.

Conclusion

For most home cooks, a nylon brush with hot water covers daily care, with a small amount of dish soap for greasy cooking. A chainmail scrubber suits heavy buildup used lightly, and a mild acid cleanser is best reserved for rust or dull patches. Finish every session with a thin oil coat. Pick the tools that match how often you cook and how much residue you leave behind, and your skillet will stay in good condition for years. For a broader look at pan care, see Cookware Maintenance Guide: Cast Iron, Carbon Steel, Stainless and Nonstick.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our cookware & knives guides, checking product details against manufacturer specifications and owner feedback.