Updated November 2026

Cooking steak in cast iron skillet over campfire is a reliable way to get a deep, crusty sear without a stove or grill. The key is building a bed of hot coals rather than cooking over open flames, controlling the heat, and preheating the skillet properly. Follow the steps below and you will end up with a medium-rare steak with a browned crust and a juicy center.

Prepare the Fire and the Skillet

Start your fire at least 45 minutes before you plan to cook. You want a bed of glowing coals, not active flames, because flames will blacken the outside of the steak before the inside is done. Once the wood has burned down to mostly coals with a thin layer of gray ash, spread them into an even layer under a grate or directly beneath the skillet.

Shopping for one? See our guide: 6 Best Wagners 1891 Original Cast Iron Skillets for Everyday Cooking (2026).

A cast iron skillet holds heat well, but it still needs time. Set the skillet on the grate, add a teaspoon of high-smoke-point oil, and let it heat for 8 to 10 minutes. The pan is ready when the oil shimmers and a drop of water skitters across the surface.

Season and Sear the Steak

Pat a 1-inch-thick steak dry with paper towels and season it generously with coarse salt and black pepper about 20 to 30 minutes before cooking. Dry surfaces brown; wet ones steam. Lay the steak in the hot skillet away from you so the oil does not splatter toward your hands.

Leave the steak alone for 2 to 3 minutes. Resist the urge to move it. When the bottom has a dark brown crust, flip it once and sear the other side for another 2 to 3 minutes. For thicker cuts, you can add a pat of butter, a crushed garlic clove and a sprig of thyme during the last minute, spooning the melted butter over the top.

Control the Heat and Check Doneness

If the crust is forming too fast and the center is still cold, slide the skillet to a cooler part of the coal bed or lift it slightly off the heat. If the steak barely sizzles, move it back to hotter coals. Managing position is your main temperature control.

Use an instant-read thermometer for accuracy. Pull the steak at 125°F for rare, 130°F for medium-rare, or 135°F for medium. The temperature will rise 5 to 8 degrees while it rests.

Rest the Steak Before Slicing

Move the steak to a cutting board and let it rest for 5 to 10 minutes, loosely tented with foil if the wind is cold. Resting lets the juices redistribute, so they stay in the meat instead of pooling on the plate. Slice against the grain for the most tender bite.

Essential Checklist

  • Cast iron skillet with a flat cooking surface
  • Bed of hot coals, not open flames
  • Heat-resistant gloves or a long-handled tool to adjust the skillet
  • Instant-read thermometer
  • High-smoke-point oil, coarse salt and black pepper
  • Paper towels, tongs and a cutting board

Common Mistakes

  • Cooking over flames instead of coals, which causes charring and uneven heat.
  • Adding the steak before the skillet is fully preheated, so it steams instead of searing.
  • Flipping too early, before a crust has formed and released.
  • Cutting into the steak immediately, which lets juices escape.
  • Cooling the skillet with water while it is hot, which can crack the pan. Let it cool first.

A pair of heat-resistant leather gloves makes it safe to adjust a hot skillet over coals. View on Amazon

A long-handled cast iron skillet is easier to position over a fire pit. View on Amazon

A folding campfire grate lifts the skillet above the coals for steadier heat. View on Amazon

If you are new to cast iron in general, Cooking with a Cast Iron Skillet: A Step-by-Step Guide for Beginners covers the basics, and How to Clean a Cast Iron Skillet After Cooking: 5 Simple Steps explains how to care for the pan once you are home.

FAQ

Can I cook steak over an open flame in a cast iron skillet?

It is better to wait for the flames to die down to coals. Open flame creates hot spots and can burn the outside of the steak before the center is cooked.

How long should I preheat the skillet over a campfire?

Plan on 8 to 10 minutes over a bed of hot coals. The oil should shimmer before you add the steak.

What thickness of steak works best?

A steak about 1 inch thick is ideal for this method. Thinner cuts cook too quickly to develop a good crust, and very thick cuts may need more time over lower heat.

Conclusion

Cooking steak in cast iron skillet over campfire rewards patience: build coals, preheat the pan, and sear without moving the meat. Use a thermometer to hit your target doneness and rest the steak before slicing. With a little practice, the campfire becomes one of the best ways to cook steak.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our cookware & knives guides, checking product details against manufacturer specifications and owner feedback.